| Sr. No. |
Machine No. |
Description of the Machine |
Used for the Operation |
Capacity / Specification |
| 01 |
LM 1 |
Lathe M/c. – 18 Feet Center Lathe |
Machining.
Turning.
Shaft.
|
a) Shaft betweenCenter:3000 mm
b) Diameter Over bed: Dia.560 mm
c) Diameter in Gap bed:Dia.1350 mm
d) Diameter in Chuck: Dia 700 mm |
| 02 |
LM 2 |
Lathe M/c. – 8 Feet Center Lathe |
Machining.
Turning. Shaft. |
a) Shaft betweenCenter:1350 mm
b) Diameter Over bed: Dia.400 mm
c) Diameter in Gap bed:Dia.900mm
d) Diameter in Chuck: Dia 400 mm |
| 03 |
LM 3 |
Lathe M/c. –
Center Lathe
|
Machining.
Turning.
|
a) Shaft betweenCenter:600 mm
b) Diameter Over bed: Dia.160 mm
c) Diameter in Gap bed:Dia.250mm
d) Diameter in Chuck: Dia220 mm
|
| 04 |
LM 4 |
Lathe M/c. –
10 feet -HMT
All Geared Centre Lathe
|
Machining.
Turning.
|
a) Shaft betweenCenter:Dia 2500 mm
b) Diameter Over bed: Dia.300 mm
c) Diameter in Gap bed:Dia.560mm
d) Diameter in Chuck: Dia. 400 mm
|
| 05 |
RD 1 |
Drill M/c. – Radial Drill Machine RM 63
|
Drilling. Rimming
|
a) Max drilling capacity : Dia 60mm
b). Radial Arm Length R – 1250 mm
|
| 06 |
RD 2 |
Drill M/c. –Hand Drill M/c.
|
Drilling.
|
a) Max drilling capacity: Dia 13 mm.
|
| 07 |
RD 3 |
Drill M/c. –Hand Drill Machine
|
Drilling.
|
a) Max drilling capacity: Dia 13 mm.
|
| 08 |
RD 4 |
Drill M/c. – Radial Drill Machine 32mm
|
Drilling.
|
a) Max drilling capacity: Dia 32 mm b) Radial Arm Length R – 800 mm
|
| 09 |
AC 1 |
Air Compressor Model T-30
|
Pneumatic Test/Paint.
|
a) 5.00 HP motor.
b). Two Stage |
| 10 |
PC 1 |
Air Plazma Cutting Machine
|
S.S. Plate Cutting
|
a) 16mm Capacity. Model KALI-MF
b). Air Cooled Torch. |
